| set |
problems |
| P-02 |
2.33, 2.36, 2.48 |
soln |
| P-03 |
2.38, 2.51, 2.55 |
soln |
| P-04 |
3.1, 3.3, 3.6 |
soln |
| P-05 |
3.9, 3.13, 3.14 |
soln |
| P-06 |
4.3, 4.7, 4.8 |
soln |
| P-07 |
4.22, 4.27, 4.28 |
soln |
| P-08 |
4.36, 4.50 (a,c,e only), 4.52 (a,c,e,f only) |
soln |
| P-09 |
4.55, 4.61 |
soln |
| P-10 |
Exam Day - No Problems! |
|
| P-11 |
4.72, 4.83, 4.86 |
soln |
| P-12 |
4.96, 4.99 |
soln |
| P-13 |
5.15, 5.17, 5.23 |
soln |
| P-14 |
5.29, 5.33, 5.38 |
soln |
| P-15 |
5.43, 5.46, 5.47 |
soln |
| P-16 |
5.52, 5.59, 5.61 |
soln |
| P-17 |
5.71, 5.78, 5.81 |
soln |
| P-18 |
5.94, 5.95, 5.99 |
soln |
| P-19 |
5.108, 5.111 |
soln |
| P-20 |
6.4, 6.8, 6.9 |
soln |
| P-21 |
Project Work Day - No Problems! |
|
| P-22 |
Exam Day - No Problems! |
|
| P-23 |
6.14, 6.15, 6.18 |
soln |
| P-24 |
Project Work Day - No Problems! |
|
| P-25 |
6.44, 6.45, 6.52
On 6.52, assume that the spring acts vertically and the 50mm vertical dimension is the distance from A to B. Note also that the drawing shows a wiggley line cut where the rest of the car would be attached - be sure to apply both a force and a moment at the cut! |
soln |
| P-26 |
6.47, 6.51, 6.54 |
soln |
| P-27 |
6.59, 6.62 |
soln |
| P-28 |
Project Work Day - No Problems! |
|
| P-29 |
6.82, 6.83, 6.84 |
soln |
| P-30 |
6.85, 6.87, 6.90 |
soln |
| P-31 |
6.103, 6.104, 6.107
For 6.103, the units in the book are wrong - they should be in-lb |
soln |
| P-32 |
Project Work Day - No Problems! |
|
| P-33 |
6.110 |
soln |
| P-34 |
Exam Day - No Problems! |
soln |
| P-35 |
Review Day - No Problems! |
|
| P-36 |
Project Work Day - No Problems! |
|
| P-37 |
Doll Decapitation Day - No Problems! |
|
| P-38 |
Doll Decapitation Day - No Problems! |
|
| P-39 |
Doll Decapitation Day- No Problems! |
|
| P-40 |
Doll Decapitation Day - No Problems! |
|
| TOP |
