MA 323 Geometric Modelling

3D C0 Bezier Spline Applet
DIRECTIONS:   In this applet, you can create a continuous curve consisting cubic segments. Functionally, the applet behaves the same as the 3D Bezier curve applet.

To create the curve in space, there are two views representing different projections of the curve onto a two dimensional plane. There is a perspective projection and a parallel projection. The button "PERSPECTIVE" allows you to toggle between the two different views. The text on the button tells you which view you are currently using. By clicking on the drawing panel, you place points on the plane x=1 (the image plane). By pressing, "A" you move the point in towards the camera (at the origin) directly on the line connecting the origin to point on the image plane. The point will not move, but the coordinates of the control point will change. By pressing "Z", you move the point away from the camera (at the origin) directly on the line connecting the origin and the point on the image plane. Again the point viewed, does not change but its coordinates do. In addition, you can rotate the curve by using the arrow keys, and zoom in and out using page up and page down.