Charge pump

From Wikipedia, the free encyclopedia

Jump to: navigation, search

A charge pump is an electronic circuit that uses capacitors as energy storage elements to create either a higher or lower voltage power source. Charge pump circuits are capable of high efficiencies, sometimes as high as 90-95% while being electrically simple circuits.

Charge pumps use some form of switching device(s) to control the connection of voltages to the capacitor. For instance, to generate a higher voltage, the first stage involves the capacitor being connected across a voltage and charged up. In the second stage, the capacitor is disconnected from the original charging voltage and reconnected with its negative terminal to the original positive charging voltage. Because the capacitor retains the voltage across it (ignoring leakage effects) the positive terminal voltage is added to the original, effectively doubling the voltage. The pulsing nature of the higher voltage output is typically smoothed by the use of an output capacitor.

This is the charge pumping action, which typically operates at tens of kilohertz up to several megahertz to minimize the amount of capacitance required. The capacitor used as the charge pump is typically known as the "flying capacitor".

Another way to explain the operation of a charge pump is to consider it as the combination of a DC to AC converter (the switches) followed by a voltage multiplier.

The voltage is load-dependent; higher loads result in lower average voltages.

Charge pumps can double voltages, triple voltages, halve voltages, invert voltages, fractionally multiply or scale voltages such as x3/2, x4/3, x2/3, etc. and generate arbitrary voltages, depending on the controller and circuit topology.

[edit] Applications

A common application for charge pump circuits is in RS-232 level shifters where they are used to derive positive and negative voltages (often +10 V and -10 V) from a single 5 V or 3 V power supply rail.
Charge pumps can also be used as LCD or white LED drivers, generating high bias voltages from a single low-voltage supply, such as a battery.
Charge pumps are a key component in EEPROM and flash memory devices. These devices require a high voltage pulse to "clean out" any existing data in a particular memory cell before it can be written with a new value. Early EEPROM and flash memory devices required two power supplies: +5V (for reading) and +12 V (for erasing). As of 2007, commercially available flash memory and EEPROM memory requires only one external power supply -- generally 1.8 or 3.3V. A higher voltage is used to erase cells, but that higher voltage is generated internally by an on-chip charge pump.

[edit] External links and references

DC/DC Conversion without Inductors. General description of charge pump operation; example applications using Maxim controllers.
K. Phang, University of Toronto: Charge Pumps: An Overview
Charge-Pump and Step-Up DC-DC Converter Solutions for Powering White LEDs in Series or Parallel Connections
Circuit Board Layout Guidelines for White LED Charge Pumps

[edit] See also

Cockcroft-Walton generator
DC to DC converter
Voltage multiplier
Switched capacitor
Charge Transfer Switch

| This electronics-related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "http://en.wikipedia.org/wiki/Charge_pump"

Categories: Electrical power conversion | Electronics stubs

Views

Article
Discussion
Edit this page
History

Personal tools

Log in / create account

Navigation

Main Page
Contents
Featured content
Current events
Random article

Interaction

About Wikipedia
Community portal
Recent changes
Contact Wikipedia
Donate to Wikipedia
Help

Search

Toolbox

What links here
Related changes
Upload file
Special pages
Printable version
Permanent link
Cite this page

Languages

Deutsch
Español
Français
日本語

This page was last modified on 22 May 2008, at 19:20.
All text is available under the terms of the GNU Free Documentation License. (See Copyrights for details.)
Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a U.S. registered 501(c)(3) tax-deductible nonprofit charity.

Privacy policy
About Wikipedia
Disclaimers