Model {
  Name			  "PEMFC_Sample"
  Version		  6.6
  MdlSubVersion		  0
  GraphicalInterface {
    NumRootInports	    5
    Inport {
      Name		      "I"
    }
    Inport {
      Name		      "Panode"
    }
    Inport {
      Name		      "Pcathode"
    }
    Inport {
      Name		      "Troom"
    }
    Inport {
      Name		      "Tinitial"
    }
    NumRootOutports	    2
    Outport {
      BusObject		      ""
      BusOutputAsStruct	      "off"
      Name		      "V"
    }
    Outport {
      BusObject		      ""
      BusOutputAsStruct	      "off"
      Name		      "Tout"
    }
    ParameterArgumentNames  ""
    ComputedModelVersion    "1.1"
    NumModelReferences	    0
    NumTestPointedSignals   0
  }
  SavedCharacterEncoding  "windows-1252"
  SaveDefaultBlockParams  on
  SampleTimeColors	  off
  LibraryLinkDisplay	  "none"
  WideLines		  off
  ShowLineDimensions	  off
  ShowPortDataTypes	  off
  ShowLoopsOnError	  on
  IgnoreBidirectionalLines off
  ShowStorageClass	  off
  ShowTestPointIcons	  on
  ShowViewerIcons	  on
  SortedOrder		  off
  ExecutionContextIcon	  off
  ShowLinearizationAnnotations on
  ScopeRefreshTime	  0.035000
  OverrideScopeRefreshTime on
  DisableAllScopes	  off
  DataTypeOverride	  "UseLocalSettings"
  MinMaxOverflowLogging	  "UseLocalSettings"
  MinMaxOverflowArchiveMode "Overwrite"
  BlockNameDataTip	  off
  BlockParametersDataTip  off
  BlockDescriptionStringDataTip	off
  ToolBar		  on
  StatusBar		  on
  BrowserShowLibraryLinks off
  BrowserLookUnderMasks	  off
  Created		  "Tue Mar 24 16:05:58 2009"
  Creator		  "rostamko"
  UpdateHistory		  "UpdateHistoryNever"
  ModifiedByFormat	  "%<Auto>"
  LastModifiedBy	  "rostamko"
  ModifiedDateFormat	  "%<Auto>"
  LastModifiedDate	  "Tue Mar 24 16:06:59 2009"
  ModelVersionFormat	  "1.%<AutoIncrement:1>"
  ConfigurationManager	  "None"
  SimulationMode	  "normal"
  LinearizationMsg	  "none"
  Profile		  off
  ParamWorkspaceSource	  "MATLABWorkspace"
  AccelSystemTargetFile	  "accel.tlc"
  AccelTemplateMakefile	  "accel_default_tmf"
  AccelMakeCommand	  "make_rtw"
  AccelVerboseBuild	  off
  TryForcingSFcnDF	  off
  RecordCoverage	  off
  CovPath		  "/"
  CovSaveName		  "covdata"
  CovMetricSettings	  "dw"
  CovNameIncrementing	  off
  CovHtmlReporting	  on
  covSaveCumulativeToWorkspaceVar on
  CovSaveSingleToWorkspaceVar on
  CovCumulativeVarName	  "covCumulativeData"
  CovCumulativeReport	  off
  CovReportOnPause	  on
  ExtModeBatchMode	  off
  ExtModeEnableFloating	  on
  ExtModeTrigType	  "manual"
  ExtModeTrigMode	  "normal"
  ExtModeTrigPort	  "1"
  ExtModeTrigElement	  "any"
  ExtModeTrigDuration	  1000
  ExtModeTrigDurationFloating "auto"
  ExtModeTrigHoldOff	  0
  ExtModeTrigDelay	  0
  ExtModeTrigDirection	  "rising"
  ExtModeTrigLevel	  0
  ExtModeArchiveMode	  "off"
  ExtModeAutoIncOneShot	  off
  ExtModeIncDirWhenArm	  off
  ExtModeAddSuffixToVar	  off
  ExtModeWriteAllDataToWs off
  ExtModeArmWhenConnect	  on
  ExtModeSkipDownloadWhenConnect off
  ExtModeLogAll		  on
  ExtModeAutoUpdateStatusClock on
  BufferReuse		  on
  ProdHWDeviceType	  "32-bit Generic"
  ShowModelReferenceBlockVersion off
  ShowModelReferenceBlockIO off
  Array {
    Type		    "Handle"
    Dimension		    1
    Simulink.ConfigSet {
      $ObjectID		      1
      Version		      "1.2.0"
      Array {
	Type			"Handle"
	Dimension		7
	Simulink.SolverCC {
	  $ObjectID		  2
	  Version		  "1.2.0"
	  StartTime		  "0.0"
	  StopTime		  "10.0"
	  AbsTol		  "auto"
	  FixedStep		  "auto"
	  InitialStep		  "auto"
	  MaxNumMinSteps	  "-1"
	  MaxOrder		  5
	  ConsecutiveZCsStepRelTol "10*128*eps"
	  MaxConsecutiveZCs	  "1000"
	  ExtrapolationOrder	  4
	  NumberNewtonIterations  1
	  MaxStep		  "auto"
	  MinStep		  "auto"
	  MaxConsecutiveMinStep	  "1"
	  RelTol		  "1e-3"
	  SolverMode		  "Auto"
	  Solver		  "ode45"
	  SolverName		  "ode45"
	  ZeroCrossControl	  "UseLocalSettings"
	  AlgebraicLoopSolver	  "TrustRegion"
	  SolverResetMethod	  "Fast"
	  PositivePriorityOrder	  off
	  AutoInsertRateTranBlk	  off
	  SampleTimeConstraint	  "Unconstrained"
	  RateTranMode		  "Deterministic"
	}
	Simulink.DataIOCC {
	  $ObjectID		  3
	  Version		  "1.2.0"
	  Decimation		  "1"
	  ExternalInput		  "[t, u]"
	  FinalStateName	  "xFinal"
	  InitialState		  "xInitial"
	  LimitDataPoints	  on
	  MaxDataPoints		  "1000"
	  LoadExternalInput	  off
	  LoadInitialState	  off
	  SaveFinalState	  off
	  SaveFormat		  "Array"
	  SaveOutput		  on
	  SaveState		  off
	  SignalLogging		  on
	  InspectSignalLogs	  off
	  SaveTime		  on
	  StateSaveName		  "xout"
	  TimeSaveName		  "tout"
	  OutputSaveName	  "yout"
	  SignalLoggingName	  "logsout"
	  OutputOption		  "RefineOutputTimes"
	  OutputTimes		  "[]"
	  Refine		  "1"
	}
	Simulink.OptimizationCC {
	  $ObjectID		  4
	  Array {
	    Type		    "Cell"
	    Dimension		    5
	    Cell		    "ZeroExternalMemoryAtStartup"
	    Cell		    "ZeroInternalMemoryAtStartup"
	    Cell		    "InitFltsAndDblsToZero"
	    Cell		    "OptimizeModelRefInitCode"
	    Cell		    "NoFixptDivByZeroProtection"
	    PropName		    "DisabledProps"
	  }
	  Version		  "1.2.0"
	  BlockReduction	  on
	  BooleanDataType	  on
	  ConditionallyExecuteInputs on
	  InlineParams		  off
	  InlineInvariantSignals  off
	  OptimizeBlockIOStorage  on
	  BufferReuse		  on
	  EnforceIntegerDowncast  on
	  ExpressionFolding	  on
	  ExpressionDepthLimit	  2147483647
	  FoldNonRolledExpr	  on
	  LocalBlockOutputs	  on
	  RollThreshold		  5
	  SystemCodeInlineAuto	  off
	  StateBitsets		  off
	  DataBitsets		  off
	  UseTempVars		  off
	  ZeroExternalMemoryAtStartup on
	  ZeroInternalMemoryAtStartup on
	  InitFltsAndDblsToZero	  on
	  NoFixptDivByZeroProtection off
	  EfficientFloat2IntCast  off
	  OptimizeModelRefInitCode off
	  LifeSpan		  "inf"
	  BufferReusableBoundary  on
	}
	Simulink.DebuggingCC {
	  $ObjectID		  5
	  Version		  "1.2.0"
	  RTPrefix		  "error"
	  ConsistencyChecking	  "none"
	  ArrayBoundsChecking	  "none"
	  SignalInfNanChecking	  "none"
	  ReadBeforeWriteMsg	  "UseLocalSettings"
	  WriteAfterWriteMsg	  "UseLocalSettings"
	  WriteAfterReadMsg	  "UseLocalSettings"
	  AlgebraicLoopMsg	  "warning"
	  ArtificialAlgebraicLoopMsg "warning"
	  CheckSSInitialOutputMsg on
	  CheckExecutionContextPreStartOutputMsg off
	  CheckExecutionContextRuntimeOutputMsg	off
	  SignalResolutionControl "UseLocalSettings"
	  BlockPriorityViolationMsg "warning"
	  MinStepSizeMsg	  "warning"
	  TimeAdjustmentMsg	  "none"
	  MaxConsecutiveZCsMsg	  "error"
	  SolverPrmCheckMsg	  "warning"
	  InheritedTsInSrcMsg	  "warning"
	  DiscreteInheritContinuousMsg "warning"
	  MultiTaskDSMMsg	  "error"
	  MultiTaskCondExecSysMsg "error"
	  MultiTaskRateTransMsg	  "error"
	  SingleTaskRateTransMsg  "none"
	  TasksWithSamePriorityMsg "warning"
	  SigSpecEnsureSampleTimeMsg "warning"
	  CheckMatrixSingularityMsg "none"
	  IntegerOverflowMsg	  "warning"
	  Int32ToFloatConvMsg	  "warning"
	  ParameterDowncastMsg	  "error"
	  ParameterOverflowMsg	  "error"
	  ParameterUnderflowMsg	  "none"
	  ParameterPrecisionLossMsg "warning"
	  ParameterTunabilityLossMsg "warning"
	  UnderSpecifiedDataTypeMsg "none"
	  UnnecessaryDatatypeConvMsg "none"
	  VectorMatrixConversionMsg "none"
	  InvalidFcnCallConnMsg	  "error"
	  FcnCallInpInsideContextMsg "Use local settings"
	  SignalLabelMismatchMsg  "none"
	  UnconnectedInputMsg	  "warning"
	  UnconnectedOutputMsg	  "warning"
	  UnconnectedLineMsg	  "warning"
	  SFcnCompatibilityMsg	  "none"
	  UniqueDataStoreMsg	  "none"
	  BusObjectLabelMismatch  "warning"
	  RootOutportRequireBusObject "warning"
	  AssertControl		  "UseLocalSettings"
	  EnableOverflowDetection off
	  ModelReferenceIOMsg	  "none"
	  ModelReferenceVersionMismatchMessage "none"
	  ModelReferenceIOMismatchMessage "none"
	  ModelReferenceCSMismatchMessage "none"
	  ModelReferenceSimTargetVerbose off
	  UnknownTsInhSupMsg	  "warning"
	  ModelReferenceDataLoggingMessage "warning"
	  ModelReferenceSymbolNameMessage "warning"
	  ModelReferenceExtraNoncontSigs "error"
	  StateNameClashWarn	  "warning"
	  StrictBusMsg		  "Warning"
	}
	Simulink.HardwareCC {
	  $ObjectID		  6
	  Version		  "1.2.0"
	  ProdBitPerChar	  8
	  ProdBitPerShort	  16
	  ProdBitPerInt		  32
	  ProdBitPerLong	  32
	  ProdIntDivRoundTo	  "Undefined"
	  ProdEndianess		  "Unspecified"
	  ProdWordSize		  32
	  ProdShiftRightIntArith  on
	  ProdHWDeviceType	  "32-bit Generic"
	  TargetBitPerChar	  8
	  TargetBitPerShort	  16
	  TargetBitPerInt	  32
	  TargetBitPerLong	  32
	  TargetShiftRightIntArith on
	  TargetIntDivRoundTo	  "Undefined"
	  TargetEndianess	  "Unspecified"
	  TargetWordSize	  32
	  TargetTypeEmulationWarnSuppressLevel 0
	  TargetPreprocMaxBitsSint 32
	  TargetPreprocMaxBitsUint 32
	  TargetHWDeviceType	  "Specified"
	  TargetUnknown		  off
	  ProdEqTarget		  on
	}
	Simulink.ModelReferenceCC {
	  $ObjectID		  7
	  Version		  "1.2.0"
	  UpdateModelReferenceTargets "IfOutOfDateOrStructuralChange"
	  CheckModelReferenceTargetMessage "error"
	  ModelReferenceNumInstancesAllowed "Multi"
	  ModelReferencePassRootInputsByReference on
	  ModelReferenceMinAlgLoopOccurrences off
	}
	Simulink.RTWCC {
	  $BackupClass		  "Simulink.RTWCC"
	  $ObjectID		  8
	  Array {
	    Type		    "Cell"
	    Dimension		    1
	    Cell		    "IncludeHyperlinkInReport"
	    PropName		    "DisabledProps"
	  }
	  Version		  "1.2.0"
	  SystemTargetFile	  "grt.tlc"
	  GenCodeOnly		  off
	  MakeCommand		  "make_rtw"
	  GenerateMakefile	  on
	  TemplateMakefile	  "grt_default_tmf"
	  GenerateReport	  off
	  SaveLog		  off
	  RTWVerbose		  on
	  RetainRTWFile		  off
	  ProfileTLC		  off
	  TLCDebug		  off
	  TLCCoverage		  off
	  TLCAssert		  off
	  ProcessScriptMode	  "Default"
	  ConfigurationMode	  "Optimized"
	  ConfigAtBuild		  off
	  IncludeHyperlinkInReport off
	  LaunchReport		  off
	  TargetLang		  "C"
	  IncludeBusHierarchyInRTWFileBlockHierarchyMap	off
	  IncludeERTFirstTime	  off
	  Array {
	    Type		    "Handle"
	    Dimension		    2
	    Simulink.CodeAppCC {
	      $ObjectID		      9
	      Array {
		Type			"Cell"
		Dimension		16
		Cell			"IgnoreCustomStorageClasses"
		Cell			"InsertBlockDesc"
		Cell			"SFDataObjDesc"
		Cell			"SimulinkDataObjDesc"
		Cell			"DefineNamingRule"
		Cell			"SignalNamingRule"
		Cell			"ParamNamingRule"
		Cell			"InlinedPrmAccess"
		Cell			"CustomSymbolStr"
		Cell			"CustomSymbolStrGlobalVar"
		Cell			"CustomSymbolStrType"
		Cell			"CustomSymbolStrField"
		Cell			"CustomSymbolStrFcn"
		Cell			"CustomSymbolStrBlkIO"
		Cell			"CustomSymbolStrTmpVar"
		Cell			"CustomSymbolStrMacro"
		PropName		"DisabledProps"
	      }
	      Version		      "1.2.0"
	      ForceParamTrailComments off
	      GenerateComments	      on
	      IgnoreCustomStorageClasses on
	      IncHierarchyInIds	      off
	      MaxIdLength	      31
	      PreserveName	      off
	      PreserveNameWithParent  off
	      ShowEliminatedStatement off
	      IncAutoGenComments      off
	      SimulinkDataObjDesc     off
	      SFDataObjDesc	      off
	      IncDataTypeInIds	      off
	      PrefixModelToSubsysFcnNames on
	      MangleLength	      1
	      CustomSymbolStrGlobalVar "$R$N$M"
	      CustomSymbolStrType     "$N$R$M"
	      CustomSymbolStrField    "$N$M"
	      CustomSymbolStrFcn      "$R$N$M$F"
	      CustomSymbolStrBlkIO    "rtb_$N$M"
	      CustomSymbolStrTmpVar   "$N$M"
	      CustomSymbolStrMacro    "$R$N$M"
	      DefineNamingRule	      "None"
	      ParamNamingRule	      "None"
	      SignalNamingRule	      "None"
	      InsertBlockDesc	      off
	      SimulinkBlockComments   on
	      EnableCustomComments    off
	      InlinedPrmAccess	      "Literals"
	      ReqsInCode	      off
	    }
	    Simulink.GRTTargetCC {
	      $BackupClass	      "Simulink.TargetCC"
	      $ObjectID		      10
	      Array {
		Type			"Cell"
		Dimension		15
		Cell			"IncludeMdlTerminateFcn"
		Cell			"CombineOutputUpdateFcns"
		Cell			"SuppressErrorStatus"
		Cell			"ERTCustomFileBanners"
		Cell			"GenerateSampleERTMain"
		Cell			"GenerateTestInterfaces"
		Cell			"ModelStepFunctionPrototypeControlComp"
"liant"
		Cell			"MultiInstanceERTCode"
		Cell			"PurelyIntegerCode"
		Cell			"SupportNonFinite"
		Cell			"SupportComplex"
		Cell			"SupportAbsoluteTime"
		Cell			"SupportContinuousTime"
		Cell			"SupportNonInlinedSFcns"
		Cell			"PortableWordSizes"
		PropName		"DisabledProps"
	      }
	      Version		      "1.2.0"
	      TargetFcnLib	      "ansi_tfl_tmw.mat"
	      TargetLibSuffix	      ""
	      TargetPreCompLibLocation ""
	      GenFloatMathFcnCalls    "ANSI_C"
	      UtilityFuncGeneration   "Auto"
	      GenerateFullHeader      on
	      GenerateSampleERTMain   off
	      GenerateTestInterfaces  off
	      IsPILTarget	      off
	      ModelReferenceCompliant on
	      IncludeMdlTerminateFcn  on
	      CombineOutputUpdateFcns off
	      SuppressErrorStatus     off
	      IncludeFileDelimiter    "Auto"
	      ERTCustomFileBanners    off
	      SupportAbsoluteTime     on
	      LogVarNameModifier      "rt_"
	      MatFileLogging	      on
	      MultiInstanceERTCode    off
	      SupportNonFinite	      on
	      SupportComplex	      on
	      PurelyIntegerCode	      off
	      SupportContinuousTime   on
	      SupportNonInlinedSFcns  on
	      EnableShiftOperators    on
	      ParenthesesLevel	      "Nominal"
	      PortableWordSizes	      off
	      ModelStepFunctionPrototypeControlCompliant off
	      ExtMode		      off
	      ExtModeStaticAlloc      off
	      ExtModeTesting	      off
	      ExtModeStaticAllocSize  1000000
	      ExtModeTransport	      0
	      ExtModeMexFile	      "ext_comm"
	      RTWCAPISignals	      off
	      RTWCAPIParams	      off
	      RTWCAPIStates	      off
	      GenerateASAP2	      off
	    }
	    PropName		    "Components"
	  }
	}
	PropName		"Components"
      }
      Name		      "Configuration"
      CurrentDlgPage	      "Solver"
    }
    PropName		    "ConfigurationSets"
  }
  Simulink.ConfigSet {
    $PropName		    "ActiveConfigurationSet"
    $ObjectID		    1
  }
  BlockDefaults {
    Orientation		    "right"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    NamePlacement	    "normal"
    FontName		    "Arial"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    ShowName		    on
  }
  BlockParameterDefaults {
    Block {
      BlockType		      Constant
      Value		      "1"
      VectorParams1D	      on
      SamplingMode	      "Sample based"
      OutDataTypeMode	      "Inherit from 'Constant value'"
      OutDataType	      "sfix(16)"
      ConRadixGroup	      "Use specified scaling"
      OutScaling	      "2^0"
      SampleTime	      "inf"
      FramePeriod	      "inf"
    }
    Block {
      BlockType		      DeadZone
      LowerValue	      "-0.5"
      UpperValue	      "0.5"
      SaturateOnIntegerOverflow	on
      LinearizeAsGain	      on
      ZeroCross		      on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Fcn
      Expr		      "sin(u[1])"
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Gain
      Gain		      "1"
      Multiplication	      "Element-wise(K.*u)"
      ParameterDataTypeMode   "Same as input"
      ParameterDataType	      "sfix(16)"
      ParameterScalingMode    "Best Precision: Matrix-wise"
      ParameterScaling	      "2^0"
      OutDataTypeMode	      "Same as input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Inport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      LatchByDelayingOutsideSignal off
      LatchByCopyingInsideSignal off
      Interpolate	      on
    }
    Block {
      BlockType		      Integrator
      ExternalReset	      "none"
      InitialConditionSource  "internal"
      InitialCondition	      "0"
      LimitOutput	      off
      UpperSaturationLimit    "inf"
      LowerSaturationLimit    "-inf"
      ShowSaturationPort      off
      ShowStatePort	      off
      AbsoluteTolerance	      "auto"
      IgnoreLimit	      off
      ZeroCross		      on
      ContinuousStateAttributes	"''"
    }
    Block {
      BlockType		      Math
      Operator		      "exp"
      OutputSignalType	      "auto"
      SampleTime	      "-1"
      OutDataTypeMode	      "Same as first input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
    }
    Block {
      BlockType		      Outport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      OutputWhenDisabled      "held"
      InitialOutput	      "[]"
    }
    Block {
      BlockType		      Product
      Inputs		      "2"
      Multiplication	      "Element-wise(.*)"
      CollapseMode	      "All dimensions"
      CollapseDim	      "1"
      InputSameDT	      on
      OutDataTypeMode	      "Same as first input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Zero"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Saturate
      UpperLimit	      "0.5"
      LowerLimit	      "-0.5"
      LinearizeAsGain	      on
      ZeroCross		      on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Scope
      ModelBased	      off
      TickLabels	      "OneTimeTick"
      ZoomMode		      "on"
      Grid		      "on"
      TimeRange		      "auto"
      YMin		      "-5"
      YMax		      "5"
      SaveToWorkspace	      off
      SaveName		      "ScopeData"
      LimitDataPoints	      on
      MaxDataPoints	      "5000"
      Decimation	      "1"
      SampleInput	      off
      SampleTime	      "-1"
    }
    Block {
      BlockType		      SubSystem
      ShowPortLabels	      "FromPortIcon"
      Permissions	      "ReadWrite"
      PermitHierarchicalResolution "All"
      TreatAsAtomicUnit	      off
      SystemSampleTime	      "-1"
      RTWFcnNameOpts	      "Auto"
      RTWFileNameOpts	      "Auto"
      RTWMemSecFuncInitTerm   "Inherit from model"
      RTWMemSecFuncExecute    "Inherit from model"
      RTWMemSecDataConstants  "Inherit from model"
      RTWMemSecDataInternal   "Inherit from model"
      RTWMemSecDataParameters "Inherit from model"
      SimViewingDevice	      off
      DataTypeOverride	      "UseLocalSettings"
      MinMaxOverflowLogging   "UseLocalSettings"
    }
    Block {
      BlockType		      Sum
      IconShape		      "rectangular"
      Inputs		      "++"
      CollapseMode	      "All dimensions"
      CollapseDim	      "1"
      InputSameDT	      on
      OutDataTypeMode	      "Same as first input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      TransferFcn
      Numerator		      "[1]"
      Denominator	      "[1 2 1]"
      AbsoluteTolerance	      "auto"
      ContinuousStateAttributes	"''"
      Realization	      "auto"
    }
  }
  AnnotationDefaults {
    HorizontalAlignment	    "center"
    VerticalAlignment	    "middle"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    FontName		    "Arial"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    UseDisplayTextAsClickCallback off
  }
  LineDefaults {
    FontName		    "Arial"
    FontSize		    9
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  System {
    Name		    "PEMFC_Sample"
    Location		    [2, 70, 1278, 976]
    Open		    on
    ModelBrowserVisibility  off
    ModelBrowserWidth	    200
    ScreenColor		    "white"
    PaperOrientation	    "landscape"
    PaperPositionMode	    "auto"
    PaperType		    "usletter"
    PaperUnits		    "inches"
    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
    TiledPageScale	    1
    ShowPageBoundaries	    off
    ZoomFactor		    "100"
    ReportName		    "simulink-default.rpt"
    Block {
      BlockType		      Inport
      Name		      "I"
      Position		      [50, 43, 80, 57]
      IconDisplay	      "Port number"
    }
    Block {
      BlockType		      Inport
      Name		      "Panode"
      Position		      [50, 93, 80, 107]
      Port		      "2"
      IconDisplay	      "Port number"
    }
    Block {
      BlockType		      Inport
      Name		      "Pcathode"
      Position		      [50, 128, 80, 142]
      Port		      "3"
      IconDisplay	      "Port number"
    }
    Block {
      BlockType		      Inport
      Name		      "Troom"
      Position		      [40, 573, 70, 587]
      Port		      "4"
      IconDisplay	      "Port number"
    }
    Block {
      BlockType		      Inport
      Name		      "Tinitial"
      Position		      [40, 618, 70, 632]
      Port		      "5"
      IconDisplay	      "Port number"
    }
    Block {
      BlockType		      Saturate
      Name		      "0-25A"
      Position		      [105, 35, 135, 65]
      UpperLimit	      "25"
      LowerLimit	      "0"
    }
    Block {
      BlockType		      Saturate
      Name		      "0-58V"
      Position		      [715, 105, 745, 135]
      UpperLimit	      "58"
      LowerLimit	      "0"
    }
    Block {
      BlockType		      Gain
      Name		      "1/(MfcCfc)"
      Position		      [555, 180, 585, 210]
      Gain		      "1/(2.2e4)"
    }
    Block {
      BlockType		      Gain
      Name		      "1/2F"
      Position		      [225, 405, 255, 435]
      Gain		      "1/(2.0*96487.0)"
    }
    Block {
      BlockType		      Saturate
      Name		      "273-373 K"
      Position		      [705, 190, 735, 220]
      UpperLimit	      "373.15"
      LowerLimit	      "273.15"
    }
    Block {
      BlockType		      Constant
      Name		      "Acell"
      Position		      [250, 190, 285, 220]
      Value		      "3.2e-2"
    }
    Block {
      BlockType		      SubSystem
      Name		      "Heat:Sensible+Latent"
      Ports		      [3, 1]
      Position		      [350, 265, 410, 385]
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      MaskHideContents	      off
      System {
	Name			"Heat:Sensible+Latent"
	Location		[218, 104, 895, 702]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"usletter"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  Inport
	  Name			  "I"
	  Position		  [25, 38, 55, 52]
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Inport
	  Name			  "T"
	  Position		  [20, 388, 50, 402]
	  Port			  "2"
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Inport
	  Name			  "Troom"
	  Position		  [20, 428, 50, 442]
	  Port			  "3"
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Gain
	  Name			  "1.0/(2F)"
	  Position		  [200, 445, 230, 475]
	  Gain			  "1.0/(2.0*96487.0)"
	}
	Block {
	  BlockType		  Gain
	  Name			  "1/(2F)"
	  Position		  [200, 300, 230, 330]
	  Gain			  "1/(2.0*96487.0)"
	}
	Block {
	  BlockType		  Gain
	  Name			  "1/2F"
	  Position		  [205, 30, 235, 60]
	  Gain			  "1/(2.0*96487.0)"
	}
	Block {
	  BlockType		  Gain
	  Name			  "1/4F"
	  Position		  [205, 165, 235, 195]
	  Gain			  "1/(4.0*96487.0)"
	}
	Block {
	  BlockType		  Gain
	  Name			  "2"
	  Position		  [50, 320, 80, 350]
	  Orientation		  "up"
	  Gain			  "2"
	}
	Block {
	  BlockType		  Constant
	  Name			  "CpH2"
	  Position		  [250, 65, 280, 95]
	  Value			  "28.68"
	}
	Block {
	  BlockType		  Constant
	  Name			  "CpH2O"
	  Position		  [250, 340, 280, 370]
	  Value			  "75.4"
	}
	Block {
	  BlockType		  Constant
	  Name			  "CpO2"
	  Position		  [250, 200, 280, 230]
	  Value			  "29.39"
	}
	Block {
	  BlockType		  Constant
	  Name			  "Hvaporization"
	  Position		  [245, 475, 275, 505]
	  Value			  "40644"
	}
	Block {
	  BlockType		  Gain
	  Name			  "Ncell"
	  Position		  [560, 220, 590, 250]
	  Gain			  "48"
	}
	Block {
	  BlockType		  Product
	  Name			  "Product"
	  Ports			  [3, 1]
	  Position		  [315, 28, 355, 132]
	  Inputs		  "3"
	  InputSameDT		  off
	  RndMeth		  "Floor"
	}
	Block {
	  BlockType		  Product
	  Name			  "Product1"
	  Ports			  [3, 1]
	  Position		  [315, 163, 355, 267]
	  Inputs		  "3"
	  InputSameDT		  off
	  RndMeth		  "Floor"
	}
	Block {
	  BlockType		  Product
	  Name			  "Product2"
	  Ports			  [3, 1]
	  Position		  [315, 295, 355, 415]
	  Inputs		  "3"
	  InputSameDT		  off
	  RndMeth		  "Floor"
	}
	Block {
	  BlockType		  Product
	  Name			  "Product3"
	  Ports			  [2, 1]
	  Position		  [315, 446, 355, 504]
	  InputSameDT		  off
	  RndMeth		  "Floor"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum"
	  Ports			  [2, 1]
	  Position		  [125, 385, 145, 405]
	  ShowName		  off
	  IconShape		  "round"
	  Inputs		  "|+-"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum1"
	  Ports			  [4, 1]
	  Position		  [475, 163, 530, 302]
	  ShowName		  off
	  Inputs		  "++++"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum2"
	  Ports			  [2, 1]
	  Position		  [85, 105, 105, 125]
	  ShowName		  off
	  IconShape		  "round"
	  Inputs		  "|+-"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Outport
	  Name			  "qsl"
	  Position		  [610, 228, 640, 242]
	  IconDisplay		  "Port number"
	  BusOutputAsStruct	  off
	}
	Line {
	  SrcBlock		  "I"
	  SrcPort		  1
	  Points		  [110, 0]
	  Branch {
	    Points		    [0, 135]
	    Branch {
	      Points		      [0, 135]
	      Branch {
		Points			[0, 145]
		DstBlock		"1.0/(2F)"
		DstPort			1
	      }
	      Branch {
		DstBlock		"1/(2F)"
		DstPort			1
	      }
	    }
	    Branch {
	      DstBlock		      "1/4F"
	      DstPort		      1
	    }
	  }
	  Branch {
	    DstBlock		    "1/2F"
	    DstPort		    1
	  }
	}
	Line {
	  SrcBlock		  "T"
	  SrcPort		  1
	  Points		  [40, 0]
	  Branch {
	    DstBlock		    "Sum"
	    DstPort		    1
	  }
	  Branch {
	    DstBlock		    "Sum2"
	    DstPort		    2
	  }
	}
	Line {
	  SrcBlock		  "Troom"
	  SrcPort		  1
	  Points		  [10, 0]
	  Branch {
	    Points		    [70, 0]
	    DstBlock		    "Sum"
	    DstPort		    2
	  }
	  Branch {
	    DstBlock		    "2"
	    DstPort		    1
	  }
	}
	Line {
	  SrcBlock		  "1/2F"
	  SrcPort		  1
	  DstBlock		  "Product"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "CpH2"
	  SrcPort		  1
	  DstBlock		  "Product"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "1/4F"
	  SrcPort		  1
	  DstBlock		  "Product1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "1/(2F)"
	  SrcPort		  1
	  DstBlock		  "Product2"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "CpH2O"
	  SrcPort		  1
	  DstBlock		  "Product2"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "1.0/(2F)"
	  SrcPort		  1
	  DstBlock		  "Product3"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Hvaporization"
	  SrcPort		  1
	  DstBlock		  "Product3"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Sum"
	  SrcPort		  1
	  DstBlock		  "Product2"
	  DstPort		  3
	}
	Line {
	  SrcBlock		  "CpO2"
	  SrcPort		  1
	  DstBlock		  "Product1"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Product"
	  SrcPort		  1
	  Points		  [80, 0; 0, 100]
	  DstBlock		  "Sum1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Product1"
	  SrcPort		  1
	  DstBlock		  "Sum1"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Product2"
	  SrcPort		  1
	  Points		  [55, 0; 0, -105]
	  DstBlock		  "Sum1"
	  DstPort		  3
	}
	Line {
	  SrcBlock		  "Product3"
	  SrcPort		  1
	  Points		  [90, 0; 0, -190]
	  DstBlock		  "Sum1"
	  DstPort		  4
	}
	Line {
	  SrcBlock		  "Sum1"
	  SrcPort		  1
	  DstBlock		  "Ncell"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Ncell"
	  SrcPort		  1
	  DstBlock		  "qsl"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "2"
	  SrcPort		  1
	  Points		  [0, -200]
	  DstBlock		  "Sum2"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Sum2"
	  SrcPort		  1
	  Points		  [20, 0]
	  Branch {
	    DstBlock		    "Product"
	    DstPort		    3
	  }
	  Branch {
	    Points		    [0, 135]
	    DstBlock		    "Product1"
	    DstPort		    3
	  }
	}
	Annotation {
	  Name			  "nH2"
	  Position		  [256, 31]
	}
	Annotation {
	  Name			  "nO2"
	  Position		  [256, 166]
	}
	Annotation {
	  Name			  "nH2O"
	  Position		  [251, 301]
	}
	Annotation {
	  Name			  "nH2O"
	  Position		  [259, 450]
	}
      }
    }
    Block {
      BlockType		      Integrator
      Name		      "Integrator"
      Ports		      [2, 1]
      Position		      [630, 186, 665, 224]
      InitialConditionSource  "external"
      IgnoreLimit	      off
    }
    Block {
      BlockType		      Constant
      Name		      "Ncell"
      Position		      [210, 168, 245, 192]
      Value		      "24"
    }
    Block {
      BlockType		      Constant
      Name		      "Ncell1"
      Position		      [220, 483, 255, 517]
      Value		      "48"
    }
    Block {
      BlockType		      Product
      Name		      "Product1"
      Ports		      [3, 1]
      Position		      [350, 406, 410, 484]
      Inputs		      "3"
      InputSameDT	      off
      RndMeth		      "Floor"
    }
    Block {
      BlockType		      Product
      Name		      "Product2"
      Ports		      [2, 1]
      Position		      [390, 53, 435, 102]
      InputSameDT	      off
      RndMeth		      "Floor"
    }
    Block {
      BlockType		      Product
      Name		      "Product3"
      Ports		      [4, 1]
      Position		      [350, 140, 410, 245]
      Inputs		      "4"
      InputSameDT	      off
      RndMeth		      "Floor"
    }
    Block {
      BlockType		      Sum
      Name		      "Sum"
      Ports		      [4, 1]
      Position		      [505, 139, 525, 251]
      ShowName		      off
      Inputs		      "---+"
      InputSameDT	      off
      OutDataTypeMode	      "Inherit via internal rule"
    }
    Block {
      BlockType		      Sum
      Name		      "Sum1"
      Ports		      [2, 1]
      Position		      [635, 110, 655, 130]
      ShowName		      off
      IconShape		      "round"
      Inputs		      "|+-"
      InputSameDT	      off
      OutDataTypeMode	      "Inherit via internal rule"
    }
    Block {
      BlockType		      Sum
      Name		      "Sum2"
      Ports		      [2, 1]
      Position		      [170, 145, 190, 165]
      ShowName		      off
      IconShape		      "round"
      Inputs		      "|+-"
      InputSameDT	      off
      OutDataTypeMode	      "Inherit via internal rule"
    }
    Block {
      BlockType		      SubSystem
      Name		      "Terminal V"
      Ports		      [4, 2]
      Position		      [240, 36, 285, 139]
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      MaskHideContents	      off
      System {
	Name			"Terminal V"
	Location		[4, 82, 999, 744]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"usletter"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  Inport
	  Name			  "I"
	  Position		  [25, 23, 55, 37]
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Inport
	  Name			  "T"
	  Position		  [25, 48, 55, 62]
	  Port			  "2"
	  IconDisplay		  "Port number"
	  Port {
	    PortNumber		    1
	    Name		    "T"
	    RTWStorageClass	    "Auto"
	    DataLoggingNameMode	    "SignalName"
	  }
	}
	Block {
	  BlockType		  Inport
	  Name			  "Panode"
	  Position		  [25, 73, 55, 87]
	  Port			  "3"
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Inport
	  Name			  "Pcathode"
	  Position		  [25, 98, 55, 112]
	  Port			  "4"
	  IconDisplay		  "Port number"
	}
	Block {
	  BlockType		  Saturate
	  Name			  "0-58V"
	  Position		  [895, 75, 925, 105]
	  UpperLimit		  "58"
	  LowerLimit		  "0"
	}
	Block {
	  BlockType		  Saturate
	  Name			  "0.00001--10"
	  Position		  [480, 490, 510, 520]
	  UpperLimit		  "10"
	  LowerLimit		  "0.00001"
	}
	Block {
	  BlockType		  Constant
	  Name			  "1mA"
	  Position		  [15, 495, 45, 525]
	  Value			  "0.001"
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Activation1"
	  Ports			  [1, 1]
	  Position		  [145, 260, 185, 320]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  System {
	    Name		    "Activation1"
	    Location		    [165, 315, 584, 581]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "T"
	      Position		      [70, 53, 95, 67]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "Gain"
	      Position		      [270, 40, 315, 80]
	      Gain		      "1.3"
	    }
	    Block {
	      BlockType		      Fcn
	      Name		      "f1"
	      Position		      [145, 45, 205, 75]
	      Expr		      "0.9514*1.0284 - 2.2e-3*u"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Act1"
	      Position		      [345, 53, 375, 67]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "f1"
	      SrcPort		      1
	      DstBlock		      "Gain"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "T"
	      SrcPort		      1
	      DstBlock		      "f1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Gain"
	      SrcPort		      1
	      DstBlock		      "Act1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Activation2"
	  Ports			  [2, 1]
	  Position		  [145, 390, 185, 450]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  System {
	    Name		    "Activation2"
	    Location		    [360, 349, 779, 615]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "T"
	      Position		      [25, 49, 55, 61]
	      NamePlacement	      "alternate"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 93, 55, 107]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "Gain"
	      Position		      [270, 60, 315, 100]
	      Gain		      "1.3"
	    }
	    Block {
	      BlockType		      Product
	      Name		      "Product"
	      Ports		      [2, 1]
	      Position		      [195, 30, 225, 125]
	      InputSameDT	      off
	      RndMeth		      "Floor"
	    }
	    Block {
	      BlockType		      Fcn
	      Name		      "f2"
	      Position		      [95, 85, 155, 115]
	      Expr		      "(1.87e-4*log(u+1))*0.40"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Act2"
	      Position		      [345, 73, 375, 87]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "f2"
	      SrcPort		      1
	      DstBlock		      "Product"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "Product"
	      SrcPort		      1
	      DstBlock		      "Gain"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "T"
	      SrcPort		      1
	      DstBlock		      "Product"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "f2"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Gain"
	      SrcPort		      1
	      DstBlock		      "Act2"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  Constant
	  Name			  "Cdl"
	  Position		  [400, 375, 430, 405]
	  Value			  "4"
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Concentration"
	  Ports			  [2, 1]
	  Position		  [140, 530, 180, 590]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  System {
	    Name		    "Concentration"
	    Location		    [342, 299, 919, 672]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "T"
	      Position		      [50, 33, 80, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [50, 83, 80, 97]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Saturate
	      Name		      "0-1.0V"
	      Position		      [360, 50, 390, 80]
	      UpperLimit	      "1.0"
	      LowerLimit	      "0"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "Gain1"
	      Position		      [285, 47, 325, 83]
	      Gain		      "-2.6"
	    }
	    Block {
	      BlockType		      Product
	      Name		      "Product"
	      Ports		      [2, 1]
	      Position		      [225, 15, 245, 115]
	      InputSameDT	      off
	      RndMeth		      "Floor"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "R/2F"
	      Position		      [120, 16, 195, 64]
	      NamePlacement	      "alternate"
	      Gain		      "4.3085e-5"
	    }
	    Block {
	      BlockType		      Fcn
	      Name		      "f1"
	      Position		      [125, 75, 185, 105]
	      Expr		      "log((abs(1-u/25))+1.0e-100)"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Conc"
	      Position		      [455, 58, 485, 72]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "R/2F"
	      SrcPort		      1
	      DstBlock		      "Product"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "T"
	      SrcPort		      1
	      DstBlock		      "R/2F"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Product"
	      SrcPort		      1
	      DstBlock		      "Gain1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "f1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "f1"
	      SrcPort		      1
	      DstBlock		      "Product"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "0-1.0V"
	      SrcPort		      1
	      DstBlock		      "Conc"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Gain1"
	      SrcPort		      1
	      DstBlock		      "0-1.0V"
	      DstPort		      1
	    }
	    Annotation {
	      Name		      "Assuming that the concentration potenti"
"al can not exceed 1.0V for each individual cell"
	      Position		      [263, 155]
	    }
	  }
	}
	Block {
	  BlockType		  DeadZone
	  Name			  "Dead Zone1"
	  Position		  [790, 185, 820, 215]
	  LowerValue		  "-0.05"
	  UpperValue		  "0.05"
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Drop delay block\n"
	  Ports			  [1, 1]
	  Position		  [375, 138, 425, 172]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  System {
	    Name		    "Drop delay block\n"
	    Location		    [228, 342, 798, 711]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 38, 55, 52]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      TransferFcn
	      Name		      "Drop delay block"
	      Position		      [250, 27, 310, 63]
	      Denominator	      "[80,1]"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "K"
	      Position		      [385, 87, 435, 123]
	      Gain		      "0.16"
	    }
	    Block {
	      BlockType		      Sum
	      Name		      "Sum1"
	      Ports		      [2, 1]
	      Position		      [225, 95, 245, 115]
	      ShowName		      off
	      IconShape		      "round"
	      Inputs		      "|+-"
	      InputSameDT	      off
	      OutDataTypeMode	      "Inherit via internal rule"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Vdyn_d"
	      Position		      [485, 98, 515, 112]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Drop delay block"
	      SrcPort		      1
	      Points		      [20, 0; 0, 95; -100, 0]
	      DstBlock		      "Sum1"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "Sum1"
	      SrcPort		      1
	      DstBlock		      "K"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "K"
	      SrcPort		      1
	      DstBlock		      "Vdyn_d"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      Points		      [150, 0]
	      Branch {
		Points			[0, 55]
		DstBlock		"Sum1"
		DstPort			1
	      }
	      Branch {
		DstBlock		"Drop delay block"
		DstPort			1
	      }
	    }
	  }
	}
	Block {
	  BlockType		  Integrator
	  Name			  "Integrator"
	  Ports			  [2, 1]
	  Position		  [600, 357, 630, 388]
	  InitialConditionSource  "external"
	  IgnoreLimit		  off
	}
	Block {
	  BlockType		  Gain
	  Name			  "Ncell"
	  Position		  [785, 75, 815, 105]
	  Gain			  "48"
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Ohmic"
	  Ports			  [2, 1]
	  Position		  [135, 695, 175, 755]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  System {
	    Name		    "Ohmic"
	    Location		    [421, 479, 971, 659]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "T"
	      Position		      [50, 33, 80, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 70, 55, 85]
	      Orientation	      "down"
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "Gain"
	      Position		      [120, 85, 170, 125]
	      Gain		      "3.0e-5"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "Gain1"
	      Position		      [320, 36, 360, 74]
	      Gain		      "-1.3"
	    }
	    Block {
	      BlockType		      Product
	      Name		      "Product"
	      Ports		      [2, 1]
	      Position		      [255, 26, 285, 79]
	      InputSameDT	      off
	      RndMeth		      "Floor"
	    }
	    Block {
	      BlockType		      Sum
	      Name		      "Sum"
	      Ports		      [2, 1]
	      Position		      [205, 30, 225, 50]
	      ShowName		      off
	      IconShape		      "round"
	      Inputs		      "|+-"
	      InputSameDT	      off
	      OutDataTypeMode	      "Inherit via internal rule"
	    }
	    Block {
	      BlockType		      Fcn
	      Name		      "f1"
	      Position		      [115, 25, 175, 55]
	      Expr		      "(-0.0158 + 3.8e-5*u)"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Ohmic"
	      Position		      [410, 48, 440, 62]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "f1"
	      SrcPort		      1
	      DstBlock		      "Sum"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Gain"
	      SrcPort		      1
	      Points		      [40, 0]
	      DstBlock		      "Sum"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "Sum"
	      SrcPort		      1
	      DstBlock		      "Product"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "T"
	      SrcPort		      1
	      DstBlock		      "f1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      Points		      [0, 0; 0, 15]
	      Branch {
		DstBlock		"Gain"
		DstPort			1
	      }
	      Branch {
		Points			[0, 50; 190, 0; 0, -90]
		DstBlock		"Product"
		DstPort			2
	      }
	    }
	    Line {
	      SrcBlock		      "Product"
	      SrcPort		      1
	      DstBlock		      "Gain1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Gain1"
	      SrcPort		      1
	      DstBlock		      "Ohmic"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Potential E"
	  Ports			  [4, 2]
	  Position		  [155, 14, 195, 121]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  System {
	    Name		    "Potential E"
	    Location		    [6, 82, 1018, 696]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "T"
	      Position		      [25, 58, 55, 72]
	      Port		      "2"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "Panode"
	      Position		      [25, 88, 55, 102]
	      Port		      "3"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Inport
	      Name		      "Pcathode"
	      Position		      [25, 118, 55, 132]
	      Port		      "4"
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "0.163"
	      Position		      [535, 275, 565, 305]
	      Gain		      "0.163"
	    }
	    Block {
	      BlockType		      Gain
	      Name		      "0.85e-3"
	      Position		      [530, 210, 560, 240]
	      Gain		      "0.85e-3"
	    }
	    Block {
	      BlockType		      SubSystem
	      Name		      "Active pressure"
	      Ports		      [4, 2]
	      Position		      [110, 20, 150, 140]
	      MinAlgLoopOccurrences   off
	      RTWSystemCode	      "Auto"
	      FunctionWithSeparateData off
	      MaskHideContents	      off
	      System {
		Name			"Active pressure"
		Location		[145, 143, 1010, 551]
		Open			off
		ModelBrowserVisibility	off
		ModelBrowserWidth	200
		ScreenColor		"white"
		PaperOrientation	"landscape"
		PaperPositionMode	"auto"
		PaperType		"usletter"
		PaperUnits		"inches"
		TiledPaperMargins	"[0.500000, 0.500000, 0.500000, 0.5000"
"00]"
		TiledPageScale		1
		ShowPageBoundaries	off
		ZoomFactor		"100"
		Block {
		  BlockType		  Inport
		  Name			  "I"
		  Position		  [25, 38, 55, 52]
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  Inport
		  Name			  "T"
		  Position		  [25, 213, 55, 227]
		  Port			  "2"
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  Inport
		  Name			  "Panode"
		  Position		  [30, 283, 60, 297]
		  Port			  "3"
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  Inport
		  Name			  "Pcathode"
		  Position		  [30, 348, 60, 362]
		  Port			  "4"
		  IconDisplay		  "Port number"
		}
		Block {
		  BlockType		  Fcn
		  Name			  "1/x-1"
		  Position		  [620, 50, 680, 80]
		  Expr			  "abs(1/u - 1)"
		}
		Block {
		  BlockType		  Fcn
		  Name			  "1/x-1."
		  Position		  [620, 180, 680, 210]
		  Expr			  "abs(1/u - 1)"
		}
		Block {
		  BlockType		  Gain
		  Name			  "I-Idensity"
		  Position		  [90, 29, 130, 61]
		  Gain			  "5"
		}
		Block {
		  BlockType		  Fcn
		  Name			  "Pressure of saturated H2O vs Temper"
"ature"
		  Position		  [145, 205, 205, 235]
		  Expr			  "(-40529.4522405347 + 401.9403391215"
"3*u-1.33430273535993*(u^2) + 0.00148378443819808*(u^3))/760"
		}
		Block {
		  BlockType		  Product
		  Name			  "Product"
		  Ports			  [2, 1]
		  Position		  [400, 35, 445, 70]
		  Inputs		  "*/"
		  InputSameDT		  off
		  RndMeth		  "Floor"
		}
		Block {
		  BlockType		  Product
		  Name			  "Product1"
		  Ports			  [2, 1]
		  Position		  [395, 165, 440, 200]
		  Inputs		  "*/"
		  InputSameDT		  off
		  RndMeth		  "Floor"
		}
		Block {
		  BlockType		  Product
		  Name			  "Product2"
		  Ports			  [2, 1]
		  Position		  [305, 265, 350, 300]
		  Inputs		  "*/"
		  InputSameDT		  off
		  RndMeth		  "Floor"
		}
		Block {
		  BlockType		  Product
		  Name			  "Product3"
		  Ports			  [2, 1]
		  Position		  [305, 330, 350, 365]
		  Inputs		  "*/"
		  InputSameDT		  off
		  RndMeth		  "Floor"
		}
		Block {
		  BlockType		  Product
		  Name			  "Product4"
		  Ports			  [2, 1]
		  Position		  [550, 46, 595, 79]
		  InputSameDT		  off
		  RndMeth		  "Floor"
		}
		Block {
		  BlockType		  Product
		  Name			  "Product5"
		  Ports			  [2, 1]
		  Position		  [545, 176, 590, 209]
		  InputSameDT		  off
		  RndMeth		  "Floor"
		}
		Block {
		  BlockType		  Product
		  Name			  "Product6"
		  Ports			  [2, 1]
		  Position		  [725, 56, 770, 89]
		  InputSameDT		  off
		  RndMeth		  "Floor"
		}
		Block {
		  BlockType		  Product
		  Name			  "Product7"
		  Ports			  [2, 1]
		  Position		  [715, 186, 760, 219]
		  InputSameDT		  off
		  RndMeth		  "Floor"
		}
		Block {
		  BlockType		  Math
		  Name			  "exp"
		  Ports			  [1, 1]
		  Position		  [480, 40, 510, 70]
		}
		Block {
		  BlockType		  Math
		  Name			  "exp1"
		  Ports			  [1, 1]
		  Position		  [480, 170, 510, 200]
		}
		Block {
		  BlockType		  Gain
		  Name			  "factor"
		  Position		  [305, 100, 355, 130]
		  Gain			  "0.5"
		}
		Block {
		  BlockType		  Gain
		  Name			  "factor1"
		  Position		  [305, 157, 355, 193]
		  Gain			  "4.192"
		}
		Block {
		  BlockType		  Gain
		  Name			  "factor2"
		  Position		  [305, 29, 355, 61]
		  Gain			  "1.653"
		}
		Block {
		  BlockType		  Constant
		  Name			  "k1"
		  Position		  [25, 110, 55, 140]
		  Value			  "1.334"
		}
		Block {
		  BlockType		  Math
		  Name			  "power(T, 1.334)"
		  Ports			  [2, 1]
		  Position		  [95, 102, 125, 133]
		  Operator		  "pow"
		}
		Block {
		  BlockType		  Outport
		  Name			  "PH2"
		  Position		  [810, 68, 840, 82]
		  IconDisplay		  "Port number"
		  BusOutputAsStruct	  off
		}
		Block {
		  BlockType		  Outport
		  Name			  "PO2"
		  Position		  [805, 198, 835, 212]
		  Port			  "2"
		  IconDisplay		  "Port number"
		  BusOutputAsStruct	  off
		}
		Line {
		  SrcBlock		  "T"
		  SrcPort		  1
		  Points		  [0, 0; 10, 0]
		  Branch {
		    Points		    [0, -110]
		    DstBlock		    "power(T, 1.334)"
		    DstPort		    1
		  }
		  Branch {
		    DstBlock		    "Pressure of saturated H2O vs Temp"
"erature"
		    DstPort		    1
		  }
		}
		Line {
		  SrcBlock		  "Pressure of saturated H2O vs Temper"
"ature"
		  SrcPort		  1
		  Points		  [0, 0; 35, 0]
		  Branch {
		    Points		    [0, -105]
		    DstBlock		    "factor"
		    DstPort		    1
		  }
		  Branch {
		    Points		    [30, 0]
		    Branch {
		    Points		    [0, 120]
		    DstBlock		    "Product3"
		    DstPort		    1
		    }
		    Branch {
		    Points		    [15, 0]
		    Branch {
		    DstBlock		    "Product2"
		    DstPort		    1
		    }
		    Branch {
		    Points		    [0, 25; 395, 0; 0, -35]
		    DstBlock		    "Product7"
		    DstPort		    2
		    }
		    }
		  }
		}
		Line {
		  SrcBlock		  "I"
		  SrcPort		  1
		  DstBlock		  "I-Idensity"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "k1"
		  SrcPort		  1
		  DstBlock		  "power(T, 1.334)"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "power(T, 1.334)"
		  SrcPort		  1
		  Points		  [0, 0; 85, 0]
		  Branch {
		    Points		    [0, -40; 170, 0]
		    DstBlock		    "Product"
		    DstPort		    2
		  }
		  Branch {
		    Points		    [0, 90; 145, 0; 0, -20]
		    DstBlock		    "Product1"
		    DstPort		    2
		  }
		}
		Line {
		  SrcBlock		  "factor2"
		  SrcPort		  1
		  DstBlock		  "Product"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "factor1"
		  SrcPort		  1
		  DstBlock		  "Product1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Product"
		  SrcPort		  1
		  DstBlock		  "exp"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Product1"
		  SrcPort		  1
		  DstBlock		  "exp1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Panode"
		  SrcPort		  1
		  DstBlock		  "Product2"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "Pcathode"
		  SrcPort		  1
		  DstBlock		  "Product3"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "Product2"
		  SrcPort		  1
		  Points		  [105, 0; 0, -195; 70, 0; 0, -20]
		  DstBlock		  "Product4"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "exp"
		  SrcPort		  1
		  DstBlock		  "Product4"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "exp1"
		  SrcPort		  1
		  DstBlock		  "Product5"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Product3"
		  SrcPort		  1
		  Points		  [160, 0; 0, -150]
		  DstBlock		  "Product5"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "Product4"
		  SrcPort		  1
		  DstBlock		  "1/x-1"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Product5"
		  SrcPort		  1
		  DstBlock		  "1/x-1."
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "1/x-1"
		  SrcPort		  1
		  DstBlock		  "Product6"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "factor"
		  SrcPort		  1
		  Points		  [340, 0; 0, -35]
		  DstBlock		  "Product6"
		  DstPort		  2
		}
		Line {
		  SrcBlock		  "1/x-1."
		  SrcPort		  1
		  DstBlock		  "Product7"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Product6"
		  SrcPort		  1
		  DstBlock		  "PH2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "Product7"
		  SrcPort		  1
		  DstBlock		  "PO2"
		  DstPort		  1
		}
		Line {
		  SrcBlock		  "I-Idensity"
		  SrcPort		  1
		  Points		  [25, 0]
		  Branch {
		    Points		    [0, 130]
		    DstBlock		    "factor1"
		    DstPort		    1
		  }
		  Branch {
		    DstBlock		    "factor2"
		    DstPort		    1
		  }
		}
		Annotation {
		  Name			  "Current density"
		  Position		  [175, 34]
		}
		Annotation {
		  Name			  "Pressure Unit: atm"
		  Position		  [121, 266]
		}
		Annotation {
		  Name			  "1000mA/200cm2"
		  Position		  [109, 16]
		}
		Annotation {
		  Name			  "Assume Panode and Pcathode  keep co"
"nstant."
		  Position		  [693, 340]
		}
		Annotation {
		  Name			  "The Output are active pressures"
		  Position		  [658, 360]
		}
	      }
	    }
	    Block {
	      BlockType		      Constant
	      Name		      "E0"
	      Position		      [505, 105, 535, 135]
	      Value		      "1.229"
	    }
	    Block {
	      BlockType		      Product
	      Name		      "Product"
	      Ports		      [2, 1]
	      Position		      [260, 19, 295, 141]
	      InputSameDT	      off
	      RndMeth		      "Floor"
	    }
	    Block {
	      BlockType		      Product
	      Name		      "Product1"
	      Ports		      [2, 1]
	      Position		      [445, 69, 485, 116]
	      InputSameDT	      off
	      RndMeth		      "Floor"
	    }
	    Block {
	      BlockType		      Product
	      Name		      "Product2"
	      Ports		      [3, 1]
	      Position		      [535, 381, 575, 429]
	      Inputs		      "3"
	      InputSameDT	      off
	      RndMeth		      "Floor"
	    }
	    Block {
	      BlockType		      Product
	      Name		      "Product4"
	      Ports		      [2, 1]
	      Position		      [330, 144, 370, 191]
	      InputSameDT	      off
	      RndMeth		      "Floor"
	    }
	    Block {
	      BlockType		      Constant
	      Name		      "R"
	      Position		      [425, 425, 480, 455]
	      Value		      "8.31"
	    }
	    Block {
	      BlockType		      Constant
	      Name		      "R/2F"
	      Position		      [230, 165, 285, 195]
	      Value		      "4.3085e-5"
	    }
	    Block {
	      BlockType		      Scope
	      Name		      "Scope"
	      Ports		      [1]
	      Position		      [330, 14, 360, 46]
	      Floating		      off
	      Location		      [1, 49, 1025, 739]
	      Open		      off
	      NumInputPorts	      "1"
	      List {
		ListType		AxesTitles
		axes1			"%<SignalLabel>"
	      }
	      SaveToWorkspace	      on
	      SaveName		      "Ph2"
	      DataFormat	      "Array"
	      MaxDataPoints	      "500000"
	      SampleTime	      "0"
	    }
	    Block {
	      BlockType		      Scope
	      Name		      "Scope1"
	      Ports		      [1]
	      Position		      [235, 264, 265, 296]
	      Floating		      off
	      Location		      [1, 49, 1025, 739]
	      Open		      off
	      NumInputPorts	      "1"
	      List {
		ListType		AxesTitles
		axes1			"%<SignalLabel>"
	      }
	      SaveToWorkspace	      on
	      SaveName		      "Po2"
	      DataFormat	      "Array"
	      MaxDataPoints	      "500000"
	      SampleTime	      "0"
	    }
	    Block {
	      BlockType		      Sum
	      Name		      "Sum"
	      Ports		      [3, 1]
	      Position		      [615, 82, 635, 158]
	      ShowName		      off
	      Inputs		      "++-"
	      InputSameDT	      off
	      OutDataTypeMode	      "Inherit via internal rule"
	    }
	    Block {
	      BlockType		      Sum
	      Name		      "Sum1"
	      Ports		      [2, 1]
	      Position		      [475, 215, 495, 235]
	      ShowName		      off
	      IconShape		      "round"
	      Inputs		      "|+-"
	      InputSameDT	      off
	      OutDataTypeMode	      "Inherit via internal rule"
	    }
	    Block {
	      BlockType		      Sum
	      Name		      "Sum2"
	      Ports		      [2, 1]
	      Position		      [630, 305, 645, 440]
	      ShowName		      off
	      InputSameDT	      off
	      OutDataTypeMode	      "Inherit via internal rule"
	    }
	    Block {
	      BlockType		      Sum
	      Name		      "Sum3"
	      Ports		      [2, 1]
	      Position		      [595, 311, 610, 369]
	      ShowName		      off
	      Inputs		      "-+"
	      InputSameDT	      off
	      OutDataTypeMode	      "Inherit via internal rule"
	    }
	    Block {
	      BlockType		      Constant
	      Name		      "T0"
	      Position		      [420, 260, 450, 290]
	      Value		      "298"
	    }
	    Block {
	      BlockType		      Constant
	      Name		      "dG0"
	      Position		      [425, 318, 495, 352]
	      Value		      "237.2e3"
	    }
	    Block {
	      BlockType		      Math
	      Name		      "ln"
	      Ports		      [1, 1]
	      Position		      [330, 65, 360, 95]
	      Operator		      "log"
	    }
	    Block {
	      BlockType		      Math
	      Name		      "sqrt"
	      Ports		      [1, 1]
	      Position		      [200, 95, 230, 125]
	      Operator		      "sqrt"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "E"
	      Position		      [685, 113, 715, 127]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "dG"
	      Position		      [680, 368, 710, 382]
	      Port		      "2"
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Active pressure"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Active pressure"
	      SrcPort		      1
	      Points		      [75, 0]
	      Branch {
		DstBlock		"Product"
		DstPort			1
	      }
	      Branch {
		Points			[0, -40; 85, 0]
		DstBlock		"Scope"
		DstPort			1
	      }
	    }
	    Line {
	      SrcBlock		      "T"
	      SrcPort		      1
	      Points		      [25, 0]
	      Branch {
		Points			[0, 90; 105, 0]
		Branch {
		  DstBlock		  "Product4"
		  DstPort		  1
		}
		Branch {
		  Points		  [0, 70; 115, 0]
		  Branch {
		    DstBlock		    "Sum1"
		    DstPort		    1
		  }
		  Branch {
		    Points		    [0, 180]
		    DstBlock		    "Product2"
		    DstPort		    2
		  }
		}
	      }
	      Branch {
		DstBlock		"Active pressure"
		DstPort			2
	      }
	    }
	    Line {
	      SrcBlock		      "Active pressure"
	      SrcPort		      2
	      Points		      [15, 0]
	      Branch {
		DstBlock		"sqrt"
		DstPort			1
	      }
	      Branch {
		Points			[0, 170]
		DstBlock		"Scope1"
		DstPort			1
	      }
	    }
	    Line {
	      SrcBlock		      "sqrt"
	      SrcPort		      1
	      DstBlock		      "Product"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "Product"
	      SrcPort		      1
	      DstBlock		      "ln"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "R/2F"
	      SrcPort		      1
	      DstBlock		      "Product4"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "ln"
	      SrcPort		      1
	      Points		      [30, 0]
	      Branch {
		DstBlock		"Product1"
		DstPort			1
	      }
	      Branch {
		Points			[0, 310]
		DstBlock		"Product2"
		DstPort			1
	      }
	    }
	    Line {
	      SrcBlock		      "Product4"
	      SrcPort		      1
	      Points		      [50, 0; 0, -65]
	      DstBlock		      "Product1"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "Product1"
	      SrcPort		      1
	      DstBlock		      "Sum"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Sum"
	      SrcPort		      1
	      DstBlock		      "E"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Panode"
	      SrcPort		      1
	      DstBlock		      "Active pressure"
	      DstPort		      3
	    }
	    Line {
	      SrcBlock		      "Pcathode"
	      SrcPort		      1
	      DstBlock		      "Active pressure"
	      DstPort		      4
	    }
	    Line {
	      SrcBlock		      "T0"
	      SrcPort		      1
	      Points		      [30, 0]
	      DstBlock		      "Sum1"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "E0"
	      SrcPort		      1
	      DstBlock		      "Sum"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "Sum1"
	      SrcPort		      1
	      Points		      [5, 0]
	      Branch {
		DstBlock		"0.85e-3"
		DstPort			1
	      }
	      Branch {
		Points			[0, 65]
		DstBlock		"0.163"
		DstPort			1
	      }
	    }
	    Line {
	      SrcBlock		      "0.85e-3"
	      SrcPort		      1
	      Points		      [10, 0; 0, -80]
	      DstBlock		      "Sum"
	      DstPort		      3
	    }
	    Line {
	      SrcBlock		      "Sum2"
	      SrcPort		      1
	      DstBlock		      "dG"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "R"
	      SrcPort		      1
	      Points		      [0, -20]
	      DstBlock		      "Product2"
	      DstPort		      3
	    }
	    Line {
	      SrcBlock		      "Product2"
	      SrcPort		      1
	      DstBlock		      "Sum2"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "dG0"
	      SrcPort		      1
	      Points		      [35, 0; 0, 20]
	      DstBlock		      "Sum3"
	      DstPort		      2
	    }
	    Line {
	      SrcBlock		      "0.163"
	      SrcPort		      1
	      Points		      [10, 0]
	      DstBlock		      "Sum3"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Sum3"
	      SrcPort		      1
	      DstBlock		      "Sum2"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  Product
	  Name			  "Product"
	  Ports			  [2, 1]
	  Position		  [590, 445, 640, 480]
	  Orientation		  "left"
	  NamePlacement		  "alternate"
	  Inputs		  "*/"
	  InputSameDT		  off
	  RndMeth		  "Floor"
	}
	Block {
	  BlockType		  Product
	  Name			  "Product1"
	  Ports			  [2, 1]
	  Position		  [265, 407, 310, 458]
	  Inputs		  "*/"
	  InputSameDT		  off
	  RndMeth		  "Floor"
	}
	Block {
	  BlockType		  Product
	  Name			  "Product2"
	  Ports			  [2, 1]
	  Position		  [520, 337, 565, 388]
	  Inputs		  "*/"
	  InputSameDT		  off
	  RndMeth		  "Floor"
	}
	Block {
	  BlockType		  Product
	  Name			  "Product3"
	  Ports			  [2, 1]
	  Position		  [260, 547, 305, 598]
	  Inputs		  "*/"
	  InputSameDT		  off
	  RndMeth		  "Floor"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum"
	  Ports			  [4, 1]
	  Position		  [740, 14, 760, 166]
	  ShowName		  off
	  Inputs		  "+---"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum1"
	  Ports			  [2, 1]
	  Position		  [180, 470, 200, 490]
	  ShowName		  off
	  IconShape		  "round"
	  Inputs		  "|++"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum2"
	  Ports			  [2, 1]
	  Position		  [445, 340, 465, 360]
	  ShowName		  off
	  IconShape		  "round"
	  Inputs		  "|+-"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum3"
	  Ports			  [2, 1]
	  Position		  [160, 620, 180, 640]
	  ShowName		  off
	  IconShape		  "round"
	  Inputs		  "|++"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum4"
	  Ports			  [2, 1]
	  Position		  [380, 495, 400, 515]
	  ShowName		  off
	  IconShape		  "round"
	  Inputs		  "|++"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum5"
	  Ports			  [2, 1]
	  Position		  [840, 80, 860, 100]
	  ShowName		  off
	  IconShape		  "round"
	  Inputs		  "|+-"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	}
	Block {
	  BlockType		  Constant
	  Name			  "Vc1_0"
	  Position		  [535, 410, 565, 440]
	  Value			  "0"
	}
	Block {
	  BlockType		  Outport
	  Name			  "V"
	  Position		  [945, 83, 975, 97]
	  IconDisplay		  "Port number"
	  BusOutputAsStruct	  off
	}
	Block {
	  BlockType		  Outport
	  Name			  "dG"
	  Position		  [945, 243, 975, 257]
	  Port			  "2"
	  IconDisplay		  "Port number"
	  BusOutputAsStruct	  off
	}
	Line {
	  SrcBlock		  "I"
	  SrcPort		  1
	  Points		  [0, 0; 15, 0]
	  Branch {
	    DstBlock		    "Potential E"
	    DstPort		    1
	  }
	  Branch {
	    Points		    [0, 125]
	    Branch {
	      DstBlock		      "Drop delay block\n"
	      DstPort		      1
	    }
	    Branch {
	      Points		      [0, 280]
	      Branch {
		DstBlock		"Activation2"
		DstPort			2
	      }
	      Branch {
		Points			[0, 45]
		Branch {
		  DstBlock		  "Sum1"
		  DstPort		  1
		}
		Branch {
		  Points		  [0, 95]
		  Branch {
		    DstBlock		    "Concentration"
		    DstPort		    2
		  }
		  Branch {
		    Points		    [0, 55]
		    Branch {
		    DstBlock		    "Sum3"
		    DstPort		    1
		    }
		    Branch {
		    Points		    [0, 110]
		    DstBlock		    "Ohmic"
		    DstPort		    2
		    }
		  }
		}
	      }
	    }
	  }
	}
	Line {
	  Name			  "T"
	  Labels		  [0, 0]
	  SrcBlock		  "T"
	  SrcPort		  1
	  Points		  [30, 0; 15, 0]
	  Branch {
	    DstBlock		    "Potential E"
	    DstPort		    2
	  }
	  Branch {
	    Labels		    [1, 1]
	    Points		    [0, 235]
	    Branch {
	      Points		      [0, 115]
	      Branch {
		DstBlock		"Activation2"
		DstPort			1
	      }
	      Branch {
		Points			[0, 140]
		Branch {
		  DstBlock		  "Concentration"
		  DstPort		  1
		}
		Branch {
		  Points		  [0, 165]
		  DstBlock		  "Ohmic"
		  DstPort		  1
		}
	      }
	    }
	    Branch {
	      DstBlock		      "Activation1"
	      DstPort		      1
	    }
	  }
	}
	Line {
	  SrcBlock		  "Potential E"
	  SrcPort		  1
	  Points		  [525, 0]
	  DstBlock		  "Sum"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Sum"
	  SrcPort		  1
	  DstBlock		  "Ncell"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Panode"
	  SrcPort		  1
	  DstBlock		  "Potential E"
	  DstPort		  3
	}
	Line {
	  SrcBlock		  "Pcathode"
	  SrcPort		  1
	  DstBlock		  "Potential E"
	  DstPort		  4
	}
	Line {
	  SrcBlock		  "Potential E"
	  SrcPort		  2
	  Points		  [15, 0; 0, 155]
	  DstBlock		  "dG"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Activation2"
	  SrcPort		  1
	  DstBlock		  "Product1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "1mA"
	  SrcPort		  1
	  Points		  [0, 0; 10, 0]
	  Branch {
	    Points		    [130, 0]
	    DstBlock		    "Sum1"
	    DstPort		    2
	  }
	  Branch {
	    Points		    [0, 150; 110, 0]
	    DstBlock		    "Sum3"
	    DstPort		    2
	  }
	}
	Line {
	  SrcBlock		  "Sum1"
	  SrcPort		  1
	  Points		  [20, 0]
	  Branch {
	    Points		    [20, 0; 0, -35]
	    DstBlock		    "Product1"
	    DstPort		    2
	  }
	  Branch {
	    Points		    [0, -130]
	    DstBlock		    "Sum2"
	    DstPort		    1
	  }
	}
	Line {
	  SrcBlock		  "Integrator"
	  SrcPort		  1
	  Points		  [0, 0; 35, 0]
	  Branch {
	    Points		    [0, 80]
	    DstBlock		    "Product"
	    DstPort		    1
	  }
	  Branch {
	    Points		    [0, -265]
	    DstBlock		    "Sum"
	    DstPort		    3
	  }
	}
	Line {
	  SrcBlock		  "Sum4"
	  SrcPort		  1
	  DstBlock		  "0.00001--10"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Product"
	  SrcPort		  1
	  Points		  [-130, 0]
	  DstBlock		  "Sum2"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Sum2"
	  SrcPort		  1
	  DstBlock		  "Product2"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Cdl"
	  SrcPort		  1
	  Points		  [70, 0]
	  DstBlock		  "Product2"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Product2"
	  SrcPort		  1
	  DstBlock		  "Integrator"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Vc1_0"
	  SrcPort		  1
	  Points		  [0, -45]
	  DstBlock		  "Integrator"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Concentration"
	  SrcPort		  1
	  DstBlock		  "Product3"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Sum3"
	  SrcPort		  1
	  Points		  [60, 0]
	  DstBlock		  "Product3"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Product3"
	  SrcPort		  1
	  Points		  [80, 0]
	  DstBlock		  "Sum4"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Product1"
	  SrcPort		  1
	  Points		  [30, 0; 0, 70]
	  DstBlock		  "Sum4"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Ohmic"
	  SrcPort		  1
	  Points		  [530, 0; 0, -575]
	  DstBlock		  "Sum"
	  DstPort		  4
	}
	Line {
	  SrcBlock		  "0.00001--10"
	  SrcPort		  1
	  Points		  [150, 0; 0, -35]
	  DstBlock		  "Product"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "0-58V"
	  SrcPort		  1
	  DstBlock		  "V"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Ncell"
	  SrcPort		  1
	  DstBlock		  "Sum5"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Sum5"
	  SrcPort		  1
	  DstBlock		  "0-58V"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Dead Zone1"
	  SrcPort		  1
	  Points		  [25, 0]
	  DstBlock		  "Sum5"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Drop delay block\n"
	  SrcPort		  1
	  Points		  [125, 0; 0, 45]
	  DstBlock		  "Dead Zone1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Activation1"
	  SrcPort		  1
	  Points		  [435, 0; 0, -220]
	  DstBlock		  "Sum"
	  DstPort		  2
	}
	Annotation {
	  Name			  "I"
	  Position		  [399, 342]
	}
	Annotation {
	  Name			  "Ract"
	  Position		  [361, 460]
	}
	Annotation {
	  Name			  "Rconc"
	  Position		  [326, 567]
	}
	Annotation {
	  Name			  "Vc1"
	  Position		  [655, 363]
	}
	Annotation {
	  Name			  "Ract+Rconc"
	  Position		  [441, 517]
	}
	Annotation {
	  Name			  "Vc1/(Ract+Rconc)"
	  Position		  [530, 477]
	}
	Annotation {
	  Name			  "Vohmic"
	  Position		  [208, 712]
	}
	Annotation {
	  Name			  "Vact2"
	  Position		  [209, 408]
	}
	Annotation {
	  Name			  "Vconc"
	  Position		  [213, 551]
	}
	Annotation {
	  Name			  "I"
	  Position		  [71, 185]
	}
	Annotation {
	  Name			  "Vact1"
	  Position		  [210, 279]
	}
	Annotation {
	  Name			  "0.001A here is only used to avoid the probl"
"ems that may occcure when I=0."
	  Position		  [621, 841]
	}
	Annotation {
	  Name			  "The Activation phenomeneon has been conside"
"red by two parts: Activation1 and Activation2.\nThe Act1 is just a temperatur"
"e denpendant voltage drop.\nThe Act2 is the a temperature and current dependa"
"nt voltage drop. \nBut it has been converted into a equivalent resistance fir"
"st, then it will be combined together with Rconc \nand the capacitor due to d"
"oule-layer chaging effect to give the voltage drop Vc1."
	  Position		  [581, 788]
	}
      }
    }
    Block {
      BlockType		      Constant
      Name		      "degradation"
      Position		      [580, 133, 615, 167]
      Value		      "0.0"
    }
    Block {
      BlockType		      Constant
      Name		      "h"
      Position		      [305, 214, 335, 246]
      Value		      "37.5"
    }
    Block {
      BlockType		      Outport
      Name		      "V"
      Position		      [790, 113, 820, 127]
      IconDisplay	      "Port number"
      BusOutputAsStruct	      off
    }
    Block {
      BlockType		      Outport
      Name		      "Tout"
      Position		      [795, 198, 825, 212]
      Port		      "2"
      IconDisplay	      "Port number"
      BusOutputAsStruct	      off
    }
    Line {
      SrcBlock		      "I"
      SrcPort		      1
      DstBlock		      "0-25A"
      DstPort		      1
    }
    Line {
      SrcBlock		      "1/(MfcCfc)"
      SrcPort		      1
      DstBlock		      "Integrator"
      DstPort		      1
    }
    Line {
      SrcBlock		      "1/2F"
      SrcPort		      1
      DstBlock		      "Product1"
      DstPort		      1
    }
    Line {
      SrcBlock		      "Product2"
      SrcPort		      1
      Points		      [30, 0; 0, 70]
      DstBlock		      "Sum"
      DstPort		      1
    }
    Line {
      SrcBlock		      "Product3"
      SrcPort		      1
      Points		      [75, 0]
      DstBlock		      "Sum"
      DstPort		      2
    }
    Line {
      SrcBlock		      "Sum"
      SrcPort		      1
      DstBlock		      "1/(MfcCfc)"
      DstPort		      1
    }
    Line {
      SrcBlock		      "Troom"
      SrcPort		      1
      Points		      [105, 0; 0, -215]
      Branch {
	DstBlock		"Sum2"
	DstPort			2
      }
      Branch {
	DstBlock		"Heat:Sensible+Latent"
	DstPort			3
      }
    }
    Line {
      SrcBlock		      "h"
      SrcPort		      1
      DstBlock		      "Product3"
      DstPort		      4
    }
    Line {
      SrcBlock		      "Acell"
      SrcPort		      1
      DstBlock		      "Product3"
      DstPort		      3
    }
    Line {
      SrcBlock		      "Ncell"
      SrcPort		      1
      DstBlock		      "Product3"
      DstPort		      2
    }
    Line {
      SrcBlock		      "Sum2"
      SrcPort		      1
      DstBlock		      "Product3"
      DstPort		      1
    }
    Line {
      SrcBlock		      "Ncell1"
      SrcPort		      1
      Points		      [45, 0; 0, -30]
      DstBlock		      "Product1"
      DstPort		      3
    }
    Line {
      SrcBlock		      "Integrator"
      SrcPort		      1
      DstBlock		      "273-373 K"
      DstPort		      1
    }
    Line {
      SrcBlock		      "273-373 K"
      SrcPort		      1
      Points		      [30, 0]
      Branch {
	DstBlock		"Tout"
	DstPort			1
      }
      Branch {
	Points			[0, 340; -620, 0; 0, -220]
	Branch {
	  Points		  [0, -170]
	  Branch {
	    DstBlock		    "Sum2"
	    DstPort		    1
	  }
	  Branch {
	    Points		    [0, -80]
	    DstBlock		    "Terminal V"
	    DstPort		    2
	  }
	}
	Branch {
	  DstBlock		  "Heat:Sensible+Latent"
	  DstPort		  2
	}
      }
    }
    Line {
      SrcBlock		      "Panode"
      SrcPort		      1
      DstBlock		      "Terminal V"
      DstPort		      3
    }
    Line {
      SrcBlock		      "Pcathode"
      SrcPort		      1
      Points		      [140, 0]
      DstBlock		      "Terminal V"
      DstPort		      4
    }
    Line {
      SrcBlock		      "Terminal V"
      SrcPort		      1
      Points		      [0, 25; 50, 0]
      Branch {
	DstBlock		"Product2"
	DstPort			2
      }
      Branch {
	Points			[0, 30]
	DstBlock		"Sum1"
	DstPort			1
      }
    }
    Line {
      SrcBlock		      "Product1"
      SrcPort		      1
      Points		      [60, 0; 0, -205]
      DstBlock		      "Sum"
      DstPort		      4
    }
    Line {
      SrcBlock		      "Heat:Sensible+Latent"
      SrcPort		      1
      Points		      [35, 0; 0, -115]
      DstBlock		      "Sum"
      DstPort		      3
    }
    Line {
      SrcBlock		      "0-25A"
      SrcPort		      1
      Points		      [60, 0]
      Branch {
	Points			[10, 0]
	Branch {
	  Points		  [0, -25; 120, 0; 0, 40]
	  DstBlock		  "Product2"
	  DstPort		  1
	}
	Branch {
	  DstBlock		  "Terminal V"
	  DstPort		  1
	}
      }
      Branch {
	Points			[0, 235]
	Branch {
	  Points		  [0, 135]
	  DstBlock		  "1/2F"
	  DstPort		  1
	}
	Branch {
	  DstBlock		  "Heat:Sensible+Latent"
	  DstPort		  1
	}
      }
    }
    Line {
      SrcBlock		      "Terminal V"
      SrcPort		      2
      Points		      [10, 0; 0, 330]
      DstBlock		      "Product1"
      DstPort		      2
    }
    Line {
      SrcBlock		      "0-58V"
      SrcPort		      1
      DstBlock		      "V"
      DstPort		      1
    }
    Line {
      SrcBlock		      "Sum1"
      SrcPort		      1
      DstBlock		      "0-58V"
      DstPort		      1
    }
    Line {
      SrcBlock		      "degradation"
      SrcPort		      1
      Points		      [25, 0]
      DstBlock		      "Sum1"
      DstPort		      2
    }
    Line {
      SrcBlock		      "Tinitial"
      SrcPort		      1
      Points		      [535, 0; 0, -410]
      DstBlock		      "Integrator"
      DstPort		      2
    }
    Annotation {
      Name		      "Hreaction"
      Position		      [436, 434]
    }
    Annotation {
      Name		      "Heat Loss"
      Position		      [445, 180]
    }
    Annotation {
      Name		      "H electricity"
      Position		      [474, 64]
    }
    Annotation {
      Name		      "The output current range is 0-25A\nIrate=20A, I"
"limit=25A\nNominal output voltage 24V\nThe output voltage can not be over 58 "
"V (Ncell*E0)\nThe output temperature can not exceed 100 C (373K)\n0.0V for st"
"dy.\n0.35V for cell degradation"
      Position		      [642, 741]
      HorizontalAlignment     "left"
    }
    Annotation {
      Name		      "dG"
      Position		      [320, 452]
    }
    Annotation {
      Name		      "Ncell here is the number of cartridges timing 2"
" = 12*2=24.\nAcell is the area of each cartridge which is about 320 cm2.\nh i"
"s set as 37.5 W/(m2*K)\nThe MfcCfc now is set to (44*500)=22000.\nThe overall"
" weight of SR12 is about 44kg.\n500 is the overall heat capacity.\n(The origi"
"nal McCfc is 3.5e4. and the original h=50.)"
      Position		      [644, 626]
      HorizontalAlignment     "left"
      FontName		      "Arial"
    }
  }
}