Wk - Day	Date	Topics	Reading	HW Due
01 - 1	9/3	Introduction to ECE, SI Units, Overview	1.1 - 1.3
01 - 2	-	Voltage, Current, Power, and Energy Definitions, Passive Sign Convention	1.4 - 1.6
01 - 3	-	Voltage Source, Current Source, Resistors, Ohm’s Law, and Power	2.1 - 2.3
02 - 1	9/10	Kirchhoff’s Laws	2.4 - 2.5
02 - 2	-	Resistors in Series and Parallel	3.1 - 3.2
02 - 3	-	Voltage and Current Divider Circuits	3.3 - 3.4
03 - 1	9/17	Wheatstone Bridge	3.5 -3.6
03 - 2	-	Review	Hand-out
03 - 3	-	Test No. 1	Chaps. 1 - 3
04 - 1	9/24	Delta-Wye Equivalents	3.7
04 - 2	-	Circuit Analysis – Definitions and Node Voltage Method	4.1 - 4.2
04 - 3	-	Node Voltage Method and Dependent Sources	4.3 - 4.4
05 - 1	10/1	Mesh Current Method	4.5
05 - 2	-	Mesh Current Method and Dependent Sources	4.6 - 4.7
05 - 3	-	Source Transformations	4.9
06 - 1	10/8	Thevenin and Norton Equivalents	4.10 - 4.11
06 - 2	-	Review of Chapter 4 Material	Hand-out
06 - 3	-	Test No. 2	3.7 - 4.11
07 - 1	10/19	Maximum Power Transfer	4.12
07 - 2	-	Superposition	4.13
07 - 3	-	Introduction to Operational Amplifiers	5.1 - 5.2
08 - 1	10/26	Inverting and Summing Op Amp	5.3 - 5.4
08 - 2	-	Noninverting and Difference Op Amp	5.5 - 5.6
08 - 3	-	Cascading & Realistic Op Amp Models	5.7
09 - 1	11/2	Op-amp Design and Applications	Hand-out
09 - 2	-	Review	Hand-out
09 - 3	-	Test No. 3	4.12 - 5.7
10 - 1	11/9	Introduction to Two-Port Networks	18.1
10 - 2	-	Two-Port Network Parameters	18.2
10 - 3	-	Terminated and Cascaded Two-Port Networks	18.3 - 18.4

---

cliff grigg

Last modified: August 18, 2009